Valve (isometric)

About 3 min read

TwIsoValve · Category: Isometric equipment

Settings

These settings are in the properties panel on the right while the widget is selected. The default value is the value the widget has when it is first added to a page.

Geometry

Setting	Type	Default	Description
Valve type valveType	Selection	ball	Valve design drawn: ball, butterfly, gate, globe, check, control or solenoid valve. Options: ball Ball valve, butterfly Butterfly valve, gate Gate valve, globe Globe valve, check Check valve, control Control valve, solenoid Solenoid valve
Pipe axis (x / y) axis	Selection	x	Isometric axis the equipment is aligned with. Switching between x and y turns the body 90° so its connections follow pipes on that axis. Options: x, y
Reverse check valve arrow reverse	Checkbox	Off	Reverses the flow arrow of a check valve.

Operation

Setting	Type	Default	Description
Valve position (0 closed — 100 open) valvePosition	Number	100	Opening in percent (0 = closed, 100 = open), usually bound to a tag. Values in between use the intermediate color.
Animate movement animate	Checkbox	On	Moves the handle or disc smoothly to a new position. When off, it jumps there immediately.

Status

Setting	Type	Default	Description
Show status band showStatus	Checkbox	On	Shows the state in color, either on the status band or indicator or, with Status color target Body, on the whole body.
Status color target statusTarget	Selection	band	Where the state color is shown: only on the band or indicator, or on the whole body. Options: band Band, body Body
Open color (empty = default) statusOpenColor	Color	—	Status color when fully open (from 99 %). Leave empty to use the default color.
Intermediate color (empty = default) statusMidColor	Color	—	Status color between closed and open. Leave empty to use the default color.
Closed color (empty = default) statusClosedColor	Color	—	Status color when closed (up to 1 %). Leave empty to use the default color.

Fault

Setting	Type	Default	Description
Fault indicator (blinking band) fault	Checkbox	Off	Fault state, usually bound to a tag. The status band switches to the fault icon color and blinks, and a fault warning is shown.
Fault icon color faultColor	Color	#e5484d	Color of the fault warning badge.
Fault icon size (0.5–2×) faultScale	Number (0.5–2)	1	Size of the fault badge, 0.5–2×. Room for the largest badge is always reserved, so the drawing does not shift.

Other settings

Setting	Type	Default	Description
Enable Flashing enableFlashing	Checkbox	Off	Makes the widget blink (an opacity pulse every second). Usually bound to an alarm condition.
Log Button logButton	Checkbox	Off	At runtime shows a chart icon when hovering the widget; clicking it adds the Tags bound to the widget to the log Tag list.

Bindings

In the Bindings (Rules) section of the properties panel, a Tag can be bound to the following properties of this widget with a Direct binding. The binding types (Direct, IntRange, FloatRange, Boolean, Bit) are the same for all widgets; they are described on the Widget Reference page.

title, visible, authorization, x, y, width, height, rotation, class, foregroundColor, backgroundColor, borderColor, borderStyle, borderWidth, borderRadius, borderTopLeftRadius, borderTopRightRadius, enableFlashing, logButton, fillColor, fillOpacity, strokeColor, strokeOpacity, strokeWidth, strokeDashArray, hoverColor, to.type, valveType, axis, valvePosition, animate, showStatus, statusTarget, statusOpenColor, statusMidColor, statusClosedColor, reverse, fault, faultColor, faultScale

Common sections

While this widget is selected, the properties panel also shows these common sections: General, Layout, Appearance, Drawing, Navigation (To), Bindings (Rules). These sections are described on the Page Editor page.