Sensor (isometric)

About 3 min read

TwIsoSensor · Category: Isometric equipment

Settings

These settings are in the properties panel on the right while the widget is selected. The default value is the value the widget has when it is first added to a page.

Geometry

Setting	Type	Default	Description
Sensor type sensorType	Selection	flow	Instrument drawn: flow meter, pressure transmitter, temperature sensor, gauge or level transmitter. Options: flow Electromagnetic flowmeter, pressure Pressure transmitter, temperature Temperature transmitter, gauge Pressure gauge, level Radar level sensor
Pipe axis (x / y) axis	Selection	x	Isometric axis the equipment is aligned with. Switching between x and y turns the body 90° so its connections follow pipes on that axis. Options: x, y
Mirror device along pipe axis mirror	Checkbox	Off	Mirrors the equipment along its axis; left and right sides swap, including the connections.

Measurement and state

Setting	Type	Default	Description
Sensor state sensorState	Selection	ok	Measurement state, usually bound to a tag: ok, warn, alarm or unknown. Numbers 0, 1 and 2 map to ok, warn and alarm; other values show unknown. Options: ok OK, warn Warning, alarm Alarm, unknown No data / unknown
Gauge pointer (%) sensorValue	Number	60	Gauge only; 0–100 percent. Convert an absolute measurement to percent with an expression.
Fault animation play	Checkbox	On	Lets the fault warning blink. When off, the fault is shown without animation.

Status appearance

Setting	Type	Default	Description
Show status indicator showStatus	Checkbox	On	Shows the state in color, either on the status band or indicator or, with Status color target Body, on the whole body.
Status color target statusTarget	Selection	band	Where the state color is shown: only on the band or indicator, or on the whole body. Options: band Indicator, body Body
OK color (empty = default) statusOkColor	Color	—	Status color for the ok state. Leave empty to use the default color.
Warning color (empty = default) statusWarnColor	Color	—	Status color for the warn state. Leave empty to use the default color.
Alarm color (empty = default) statusAlarmColor	Color	—	Status color for the alarm state. Leave empty to use the default color.

Fault

Setting	Type	Default	Description
Fault indicator fault	Checkbox	Off	Fault state, usually bound to a tag. Shows a warning badge in the fault icon color; it blinks while the animation is on.
Fault icon color faultColor	Color	#e5484d	Color of the fault warning badge.
Fault icon size (0.5–2×) faultScale	Number (0.5–2)	1	Size of the fault badge, 0.5–2×. Room for the largest badge is always reserved, so the drawing does not shift.

Other settings

Setting	Type	Default	Description
Enable Flashing enableFlashing	Checkbox	Off	Makes the widget blink (an opacity pulse every second). Usually bound to an alarm condition.
Log Button logButton	Checkbox	Off	At runtime shows a chart icon when hovering the widget; clicking it adds the Tags bound to the widget to the log Tag list.

Bindings

In the Bindings (Rules) section of the properties panel, a Tag can be bound to the following properties of this widget with a Direct binding. The binding types (Direct, IntRange, FloatRange, Boolean, Bit) are the same for all widgets; they are described on the Widget Reference page.

title, visible, authorization, x, y, width, height, rotation, class, foregroundColor, backgroundColor, borderColor, borderStyle, borderWidth, borderRadius, borderTopLeftRadius, borderTopRightRadius, enableFlashing, logButton, fillColor, fillOpacity, strokeColor, strokeOpacity, strokeWidth, strokeDashArray, hoverColor, to.type, sensorType, axis, sensorState, sensorValue, showStatus, statusTarget, statusOkColor, statusWarnColor, statusAlarmColor, fault, faultColor, faultScale, mirror, play

Common sections

While this widget is selected, the properties panel also shows these common sections: General, Layout, Appearance, Drawing, Navigation (To), Bindings (Rules). These sections are described on the Page Editor page.