Pump (isometric)

About 4 min read

TwIsoPump · Category: Isometric equipment

Settings

These settings are in the properties panel on the right while the widget is selected. The default value is the value the widget has when it is first added to a page.

Geometry

Setting	Type	Default	Description
Pump type pumpType	Selection	centrifugal	Pump design drawn: centrifugal or inline. Options: centrifugal Centrifugal pump, inline Inline pump
Pipe axis (x / y) axis	Selection	x	Isometric axis the equipment is aligned with. Switching between x and y turns the body 90° so its connections follow pipes on that axis. Options: x, y
Mirror motor along pump axis mirror	Checkbox	Off	Mirrors the equipment along its axis; left and right sides swap, including the connections.
Discharge direction dischargeDir	Selection	side	Direction of the discharge nozzle: to the side or upward. Options: side Side, up Up
Nozzle diameter scale (0.6–1.3) nozzleScale	Number	1	Diameter factor of the connection nozzles and flanges, 0.6–1.3 (default 1).

Operation

Setting	Type	Default	Description
Running running	Checkbox	On	Operating state, usually bound to a tag. Running shows the running color and turns the impeller while the animation is on.
Fan and fault animation play	Checkbox	On	Allows the impeller rotation and the blinking of the fault warning. When off, the pump is drawn still.
Fan speed (0.2–5) speed	Number	1	Impeller rotation speed factor, 0.2–5 (1 = normal).

Status

Setting	Type	Default	Description
Show running status showStatus	Checkbox	On	Shows the state in color, either on the status band or indicator or, with Status color target Body, on the whole body.
Status color target statusTarget	Selection	band	Where the state color is shown: only on the band or indicator, or on the whole body. Options: band Band, body Body
Running color (empty = default) statusOpenColor	Color	—	Status color while running. Leave empty to use the default color.
Stopped color (empty = default) statusClosedColor	Color	—	Status color while stopped. Leave empty to use the default color.
Show fan state color showFanStatus	Checkbox	On	Paints the fan blades in the stopped, running or fault color. When off, the blades keep their metal color.
Stopped fan color fanStoppedColor	Color	#8a9296	Fan blade color while the equipment is not running.
Running fan color fanRunningColor	Color	#2b9964	Fan blade color while the equipment is running.
Faulted fan color fanFaultColor	Color	#e5484d	Fan blade color during a fault; a fault takes priority over the running state.

Fault

Setting	Type	Default	Description
Fault indicator fault	Checkbox	Off	Fault state, usually bound to a tag. Shows a warning badge in the fault icon color; it blinks while the animation is on.
Fault icon color faultColor	Color	#e5484d	Color of the fault warning badge.
Fault icon size (0.5–2×) faultScale	Number (0.5–2)	1	Size of the fault badge, 0.5–2×. Room for the largest badge is always reserved, so the drawing does not shift.

Other settings

Setting	Type	Default	Description
Enable Flashing enableFlashing	Checkbox	Off	Makes the widget blink (an opacity pulse every second). Usually bound to an alarm condition.
Log Button logButton	Checkbox	Off	At runtime shows a chart icon when hovering the widget; clicking it adds the Tags bound to the widget to the log Tag list.

Bindings

In the Bindings (Rules) section of the properties panel, a Tag can be bound to the following properties of this widget with a Direct binding. The binding types (Direct, IntRange, FloatRange, Boolean, Bit) are the same for all widgets; they are described on the Widget Reference page.

title, visible, authorization, x, y, width, height, rotation, class, foregroundColor, backgroundColor, borderColor, borderStyle, borderWidth, borderRadius, borderTopLeftRadius, borderTopRightRadius, enableFlashing, logButton, fillColor, fillOpacity, strokeColor, strokeOpacity, strokeWidth, strokeDashArray, hoverColor, to.type, pumpType, axis, running, showFanStatus, fanStoppedColor, fanRunningColor, fanFaultColor, play, speed, mirror, dischargeDir, nozzleScale, showStatus, statusTarget, statusOpenColor, statusClosedColor, fault, faultColor, faultScale

Common sections

While this widget is selected, the properties panel also shows these common sections: General, Layout, Appearance, Drawing, Navigation (To), Bindings (Rules). These sections are described on the Page Editor page.